New regulations from the Housing and Urban Rural Development Bureau! It is strictly prohibited to step on steel bars directly during

After the completion of the binding and installation process of the floor reinforcement, it is common to encounter situations on site where management personnel carry out inspection and acceptance work, and construction personnel frequently walk and directly step on the reinforcement during concrete pouring operations.

Precast Lifting Clutch

This behavior can easily cause the displacement of steel bars or cushion blocks, leading to quality problems such as excessive deviation in the thickness of the steel bar protective layer.

.

GB/T50784-2013 Basic principle of ultrasonic method for measuring internal defects in concrete. When there are defects inside the concrete

The defect free area in concrete allows sound waves to propagate in a straight line with the shortest distance traveled; When encountering defects such as holes, cracks, and loose layers, sound waves cannot directly pass through (defects are mostly gas/liquid media, with a large difference in acoustic impedance from concrete, which can cause reflection and refraction), and can only pass through the intact concrete around the defect, with the actual propagation path far greater than the geometric distance measured.

Cast In Plate

.

Local standard | | The local standard for engineering construction in Guangxi, “Construction Technology Regulations for Concrete

This website indicates the text and images of “Source: Guangxi Green Building Materials Information” LOGO、 The copyright of creativity and other content belongs to Guangxi Green Building Materials Information.

Any media, website or individual must indicate the source when reprinting or using it.

Halfen Channel

Violators will be held accountable by this website in accordance with the law.

.

Discussion on Antifreeze Concrete and Antifreeze Concrete

In the construction industry, some construction workers often refer to winter construction concrete and concrete with frost resistance requirements in structural design as “frost resistant concrete”.

The author believes that the concrete used in winter construction mainly adopts technical measures to prevent frost heave damage before reaching the critical strength after pouring, which meets the technical requirements and should be called antifreeze concrete.

The structural design has requirements for frost resistance grade, and only concrete with long-term resistance to freeze-thaw cycles should be called frost resistant concrete.

Lifting Socket

.